Faculty Profiles

Alanwar, M., Hassan, A. A., Abdelatief, M. A., Ibrahim, E. Z., & Elsayed, M. L. (2024). Performance enhancement of steam ejector via novel primary nozzle bypass: CFD analysis. International Communications in Heat and Mass Transfer, 159. https://doi.org/10.1016/j.icheatmasstransfer.2024.108348

Elsayed, M. L., Afifi, A., Park, C., Mitsingas, C., & Kweon, C.-B. (2024). Heat Transfer Deterioration Mitigation for Supercritical CO2 Fluid in Inclined Mini Tubes: Computational Analysis. In Volume 9: Heat Transfer and Thermal Engineering. American Society of Mechanical Engineers. https://doi.org/10.1115/imece2024-143150

Alsawy, T., Elsayed, M. L., Mohammed, R. H., & Mesalhy, O. (2024). Accuracy assessment of the turbomachinery performance maps correction models used in dynamic characteristics of supercritical CO2 Brayton power cycle. Energy, 309. https://doi.org/10.1016/j.energy.2024.133112

Alsawy, T., Mohammed, R. H., Mesalhy, O., & Elsayed, M. L. (2024). Dynamic performance of supercritical CO2 Brayton cycle and its relationship to the correction of turbomachinery performance maps: A comparative analysis. Applied Thermal Engineering, 242. https://doi.org/10.1016/j.applthermaleng.2024.122364

Afifi, A., Zawati, H., Ibrahim, E. Z., Elsayed, M. L., & Abdelatief, M. A. (2022). Assessment strategy for a longitudinally finned semi-circular tube bank. International Communications in Heat and Mass Transfer, 139. https://doi.org/10.1016/j.icheatmasstransfer.2022.106489

Elsayed, M. L., Alharbi, S., & Chow, L. C. (2021). Utilization of waste heat from a commercial GT for freshwater production, cooling and additional power: Exergoeconomic analysis and optimization. Desalination, 513. https://doi.org/10.1016/j.desal.2021.115127

Afifi, A., Ibrahim, E. Z., Sayed Ahmed, S. A., Elwan, W. M., Elsayed, M. L., & Abdelatief, M. A. (2021). Thermal performance augmentation of a semi-circular cylinder in crossflow using longitudinal fins. International Communications in Heat and Mass Transfer, 125. https://doi.org/10.1016/j.icheatmasstransfer.2021.105159

Elsayed, M. L., Wu, W., & Chow, L. C. (2021). High salinity seawater boiling point elevation: Experimental verification. Desalination, 504. https://doi.org/10.1016/j.desal.2021.114955

Alharbi, S., Elsayed, M., & Chow, L. (2021). ENERGY AND EXERGY ANALYSIS OF A NEW COMBINED SYSTEM FOR POWER, COOLING, HEATING AND FRESHWATER PRODUCTION BASED ON GAS TURBINE. In Proceedings of the Thermal and Fluids Engineering Summer Conference (Vol. 2021-May, pp. 389–403). https://doi.org/10.1615/TFEC2021.cnd.32430

Elsayed, M. L., Abdelatief, M. A., Ahmed, S. A., Emeara, M. S., & Elwan, W. M. (2021). Thermal design evaluation of ribbed/grooved tubes: An entropy and exergy approach. International Communications in Heat and Mass Transfer, 120. https://doi.org/10.1016/j.icheatmasstransfer.2020.105048

Wang, Z., Liu, J., Mohammed, R., Elsayed, M., Chow, L., & Su, M. (2020). A stably cross-linked ink on filter paper with 1D transport for efficient photothermal water treatment. SN Applied Sciences, 2(11). https://doi.org/10.1007/s42452-020-03556-7

Mesalhy, O., Elsayed, M. L., Corona, J. J., Kwarteng, A. A., Kizito, J. P., Leland, Q. H., & Chow, L. C. (2020). Study of a high-reliability dual-fan system for cooling aerospace electromechanical actuators. Thermal Science and Engineering Progress, 18. https://doi.org/10.1016/j.tsep.2020.100540

Alharbi, S., Elsayed, M. L., & Chow, L. C. (2020). Exergoeconomic analysis and optimization of an integrated system of supercritical CO2 Brayton cycle and multi-effect desalination. Energy, 197. https://doi.org/10.1016/j.energy.2020.117225

Mohammed, R. H., Mesalhy, O., Elsayed, M. L., Huo, R., Su, M., & Chow, L. C. (2020). Performance of desiccant heat exchangers with aluminum foam coated or packed with silica gel. Applied Thermal Engineering, 166. https://doi.org/10.1016/j.applthermaleng.2019.114626

Elsayed, M. L., Mesalhy, O., Kizito, J. P., Leland, Q. H., & Chow, L. C. (2020). Performance of a guided plate heat sink at high altitude. International Journal of Heat and Mass Transfer, 147. https://doi.org/10.1016/j.ijheatmasstransfer.2019.118926

Mohammed, R. H., Mesalhy, O., Elsayed, M. L., & Chow, L. C. (2019). Performance enhancement of adsorption beds with silica-gel particles packed in aluminum foams Amélioration de la performance des lits d’adsorption des mousses d’aluminium contenant des particules de gel de silice. International Journal of Refrigeration, 104, 201–212. https://doi.org/10.1016/j.ijrefrig.2019.03.013

Elsayed, M. L., Mesalhy, O., Mohammed, R. H., Kizito, J. P., Leland, Q. H., & Chow, L. C. (2019). Enhancement of a heat sink performance using a partial shield and/or a guide plate. International Journal of Heat and Mass Transfer, 134, 948–958. https://doi.org/10.1016/j.ijheatmasstransfer.2019.01.096

Mohammed, R. H., Mesalhy, O., Elsayed, M. L., & Chow, L. C. (2019). Assessment of numerical models in the evaluation of adsorption cooling system performance Évaluation de modèles numériques dans l’évaluation des performances du système de refroidissement à adsorption. International Journal of Refrigeration, 99, 166–175. https://doi.org/10.1016/j.ijrefrig.2018.12.017

Elsayed, M. L., Mesalhy, O., Mohammed, R. H., & Chow, L. C. (2019). Transient and thermo-economic analysis of MED-MVC desalination system. Energy, 167, 283–296. https://doi.org/10.1016/j.energy.2018.10.145

Elsayed, M. L., Mesalhy, O., Mohammed, R. H., & Chow, L. C. (2019). Performance modeling of MED-MVC systems: Exergy-economic analysis. Energy, 166, 552–568. https://doi.org/10.1016/j.energy.2018.10.080

Elsayed, M. L., Mesalhy, O., Mohammed, R. H., & Chow, L. C. (2018). Exergy and thermo-economic analysis for MED-TVC desalination systems. Desalination, 447, 29–42. https://doi.org/10.1016/j.desal.2018.06.008

Mohammed, R. H., Mesalhy, O., Elsayed, M. L., & Chow, L. C. (2018). Scaling analysis of heat and mass transfer processes in an adsorption packed bed. International Journal of Thermal Sciences, 133, 82–89. https://doi.org/10.1016/j.ijthermalsci.2018.07.017

Elsayed, M. L., Mesalhy, O., Mohammed, R. H., & Chow, L. C. (2018). Effect of disturbances on MED-TVC plant characteristics: Dynamic modeling and simulation. Desalination, 443, 99–109. https://doi.org/10.1016/j.desal.2018.05.021

Elsayed, M. L., Mesalhy, O., Mohammed, R. H., & Chow, L. C. (2018). Transient performance of MED processes with different feed configurations. Desalination, 438, 37–53. https://doi.org/10.1016/j.desal.2018.03.016

Elsayed, M. L., Mesalhy, O., Mohammed, R. H., & Chow, L. C. (2018). Effect of input parameters intensity and duration on dynamic performance of MED-TVC plant. Applied Thermal Engineering, 137, 475–486. https://doi.org/10.1016/j.applthermaleng.2018.03.106

Mohammed, R. H., Mesalhy, O., Elsayed, M. L., Hou, S., Su, M., & Chow, L. C. (2018). Physical properties and adsorption kinetics of silica-gel/water for adsorption chillers. Applied Thermal Engineering, 137, 368–376. https://doi.org/10.1016/j.applthermaleng.2018.03.088

Mohammed, R. H., Mesalhy, O., Elsayed, M. L., & Chow, L. C. (2018). Performance evaluation of a new modular packed bed for adsorption cooling systems. Applied Thermal Engineering, 136, 293–300. https://doi.org/10.1016/j.applthermaleng.2018.02.103

Mohammed, R. H., Mesalhy, O., Elsayed, M. L., Su, M., & C. Chow, L. (2018). Revisiting the adsorption equilibrium equations of silica-gel/water for adsorption cooling applications. International Journal of Refrigeration, 86, 40–47. https://doi.org/10.1016/j.ijrefrig.2017.10.038

Elsayed, M. L., Mesalhy, O., Mohammed, R. H., & Chow, L. C. (2018). Effect of changes in input parameters on the operation of a MED-TVC plant. In Proceedings of the Thermal and Fluids Engineering Summer Conference (Vol. 2018-March, pp. 709–723). https://doi.org/10.1615/TFEC2018.ewf.021614

Mohammed, R. H., Mesalhy, O., Elsayed, M. L., & Chow, L. C. (2018). Experimental and numerical investigation of a new silica-gel/water packed bed for adsorption cooling applications. In Proceedings of the Thermal and Fluids Engineering Summer Conference (Vol. 2018-March, pp. 1535–1546). https://doi.org/10.1615/TFEC2018.prm.021615

Alharbi, S., Elsayed, M. L., & Chow, L. (2018). Thermo-economic analysis of an integrated supercritical CO2 brayton cycle and multiple effect desalination systems. In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Vol. 6B-2018). https://doi.org/10.1115/IMECE2018-88409

Mohammed, R. H., Mesalhy, O., Elsayed, M. L., & Chow, L. C. (2017). Novel compact bed design for adsorption cooling systems: Parametric numerical study Conception d’un nouveau lit compact pour systèmes de refroidissement à adsorption: étude numérique paramétrique. International Journal of Refrigeration, 80, 238–251. https://doi.org/10.1016/j.ijrefrig.2017.04.028

Elsayed, M. L., & Mesalhy, O. (2015). Studying the performance of solid/perforated pin-fin heat sinks using entropy generation minimization. Heat and Mass Transfer, 51(5), 691–702. https://doi.org/10.1007/s00231-014-1451-9

Elsayed, M. L., & Mesalhy, O. (2015). Effect of a slotted shield on thermal and hydraulic performance of a heat sink. Journal of Electronic Packaging, 137(1). https://doi.org/10.1115/1.4027920

Shaalan, M. R., Saleh, M. A., Mesalhy, O., & Elsayed, M. L. (2012). Thermo/fluid performance of a shielded heat sink. International Journal of Thermal Sciences, 60, 171–181. https://doi.org/10.1016/j.ijthermalsci.2012.05.009